HF2 Receiver


The SDRstick™ HF2 is a small, low-power consumption Software Defined Receiver built in a narrow strip or "stick" form-factor. Utilizing an onboard LTC2208 16-bit @ 122.8MSPS Analog to Digital Convertor, 20dB LNA, 0-31db Attenuator (1dB Steps), Low-phase Noise Oscillator (-152dBc/Hz @ 10kHz) and Audio Codec with headphone output, the UDPSDR-HF2 with the BeMicro SDK or BeMicro CV-A9 FPGA development board, firmware load and an appropriate software package make a complete Digital Down Conversion HF receiver for 100KHz to 55MHz. The external antenna RF input is via an SMA connector. An SMA connector is also provide for a sine-wave GPS Disciplined Oscillator. Board power is supplied through an onboard power jack. Depending on the output power specification of the USB ports of the computer that is connected to the HF2, board power may be optionally supplied through the USB connector of the BeMicro SDK .

Please Note: A functional radio requires both the UDPSDR-HF2 and a BeMicro SDK or BeMicro CV-A9 FPGA development board. Purchase this item only if you already have or plan to purchase separately a BeMicro SDK or BeMicro CV-A9 FPGA development board.

Export Restriction: This item may be subject to export licensing regulations. Shipment to some countries is restricted.